Barco 26-0313000-00 manual RëáåÖ=bñí=qêáÖÖÉê=, RëáåÖ=pçìêÅÉ=mêÉîáÉï

Ext

Trigger

7. Operations

Working with Layer Functions

rëáåÖ=bñí=qêáÖÖÉê=

The Ext Trigger function is only used with the Barco Events Manager or Barco Stage Manager applications. With these two products, when the timeline reaches a programmed "pause" cue, the timeline pauses. This in turn causes Encore’s Ext Trigger button to flash. Pressing Ext Trigger restarts the timeline.

„Use the following steps to use the Ext Trigger function:

1.Ensure that Encore is properly connected to (and recognized by) the Barco Events Manager or Barco Stage Manager application. An Ethernet connection is required. Refer to the application’s User’s Guide for interfacing instructions.

2.On the Barco Events Manager or Barco Stage Manager application, program a "pause" cue in the normal manner. When the timeline reaches the "pause" cue, the timeline pauses. This action causes the Ext Trigger button to flash.

3.To restart the application’s timeline, press Ext Trigger.

Note	If you are not using Barco Events Manager or Barco Stage
	Manager, the Ext Trigger button has no function.

Source

Preview

rëáåÖ=pçìêÅÉ=mêÉîáÉï

The Source Preview function enables you to quickly isolate a selected layer for sizing and adjustment purposes — in Preview only.

„Use the following steps to use the Source Preview function:

1.In the Layer Control Section, select the layer that you want to isolate.

2.In the Layer Functions Section, press Source Preview. The following actions occur:

~For the selected layer, the border and shadow is turned off.

~The PIP (or Key) is placed in the center of the screen and sized to 90% of the output resolution.

~If the system is in wide screen mode, the layer is centered in screen 1 and sized to 90% of that screen.

~All other layers are hidden.

~The background switches to a neutral gray.

~The Input Menu for the selected source appears.

After Source Preview has been pressed for the first time, the next press sizes the PIP to 1:1, with respect to the source’s input resolution. If the 1:1 size is larger than the output resolution of the Preview screen, the PIP is positioned such that the top/left corner is showing.

Subsequent presses of the Source Preview button will reveal the other corners. The next button press returns the PIP to 90% size of the output resolution.

Note	If the 1:1 PIP size is less than the output resolution of the
	Preview screen, the PIP will be centered in the Preview
	screen at 1:1.

Encore Presentation System • User’s Guide • Rev 04 333