Barco 26-0313000-00 manual Lìíéìí=jÉåì=cìåÅíáçåë, Lìíéìí=pìÄ=jÉåìë

5. Menu Orientation

Output Menu

lìíéìí=jÉåì=cìåÅíáçåë

The following Output Menu functions are provided:

•Destination — indicates the destination on which you are currently working (as selected on the Destination Bus). If multiple destinations are active, you can select one of them using this field.

Note

A selected Processor destination can be configured as a single screen or multiple screens (in a widescreen application). In this situation, all changes to the Output Menu affect all Processors in a widescreen definition. ScreenPRO-II destinations are single screen.

•Format — sets the resolution and frame rate at which you want to drive your projector(s). To minimize synchronization problems, select a frame rate that is consistent with your input sources.

S If you are using 59.94 NTSC video inputs, run the output at the same rate in order to reduce jutter artifacts.

After selecting a format, press {APPLY FORMAT} to accept the selection. In Appendix A, refer to the “Input and Output Resolutions” section on page 375 for details on all available resolutions.

•Color Space — sets the output’s color space, either RGB or YPbPr — per the specifics of your projector.

•For ScreenPRO-IIswith the EOC option installed, press {E OUT} to display the Enhanced Output Menu. The label does not appear for SP-IIsthat do not have the option. Refer to the “Enhanced Output Menu” section on page 161.

•For VPs only, press {GLCK} to display the Genlock Menu. The label does not appear for VPx destinations. Refer to the “Genlock Menu” section on page 164 for details.

•Press {APPLY FORMAT} to accept a selected output format.

•Press {SETTINGS} to display the Settings Menu. Refer to the “Settings Menu” section on page 165 for details.

•Press {TEST PATTERN} to display the Test Pattern Menu. Refer to the “Test Pattern Menu” section on page 166 for details.

•Press {WIDE SCREEN} to display the Wide Screen Menu. Refer to the “Wide Screen Settings Menu” section on page 167 for details. This softkey label only appears when a widescreen destination is selected.

lìíéìí=pìÄ=jÉåìë

The following sub menus can be accessed from the Output Menu:

•Enhanced Output Menu

•Genlock Menu

•Settings Menu

•Test Pattern Menu

•Wide Screen Settings Menu

160 Encore Presentation System • User’s Guide • Rev 04