Barco 26-0313000-00 manual `ìëíçã=çêÇÉê=jÉåì, Custom Border Menu

5. Menu Orientation

PIP Adjustment Menu

`ìëíçã=_çêÇÉê=jÉåì

From the Border Menu, press {CUSTOM BORDER} to display the Custom Border Menu.

		CUSTOM BORDER MENU
B	Style		21
A				N
C
				A
K	Adjust Pip Soft Edge Only		Off
				V
	Inner Border: Width ( % )		9
		Soft Edge ( % )	0
		Color Tone ( % )	100	A
				D
		Soft Edge Curve	1	J
		Soft Edge Gamma	1.0
	Outer Border: Width ( % )		0
		Soft Edge ( % )	0
	SAVE
Figure 5-65.		Custom Border Menu (sample)

The Custom Border Menu enables you to create and save custom borders. To use the feature, start with a pre-configured border style on the Border Menu (styles 1 through 20), then using the Custom Border Menu, create a new custom border look. Finally, save the new border for use on the Border Menu. The following functions are available:

•Style — selects a number (from 21 - 40) under which the new custom border will be saved for later use on the Border Menu. The label (EMPTY) indicates that the register does not contain a border definition, and is available for programming.

•Adjust Pip Soft Edge Only — enables or disables limited custom adjustment:

~When set to ON, only the PIP’s soft edge can be customized via three parameters:

•Soft Edge (%)

•Soft Edge Curve

•Soft Edge Gamma

~If a border style other than 1 was selected on the Border Menu, this field displays OFF. Three groups of custom border adjustments are available as detailed below.

•Inner Border — adjusts the border that is adjacent to the live PIP data. The following parameters can be adjusted individually:

~Width (%), Soft Edge (%), Color Tone (%)

~Soft Edge Curve, Soft Edge Gamma

•Outer Border — adjusts the border that is adjacent to the inner border. The following parameters can be adjusted individually:

~Width (%), Soft Edge (%), Color Tone (%)

~Soft Edge Curve, Soft Edge Gamma

222 Encore Presentation System • User’s Guide • Rev 04