354 Encore Presentation System • User’s Guide • Rev 04
7. Operations
Using Backup and Restore
póëíÉã=oÉëíçêÉ
Please note the following important points regarding the "restore" function:
When restoring, you must have the same version of software installed in the
Controller as was used to perform the backup.
Conversion between versions can only be done with the Barco Backup and
Restore utility.
Use the following steps to restore your system from the flash memory card:
1. Ensure that your flash memory card is properly inserted in the Controller’s
MEMORY CARD slot.
2. Press MISC on the Home Menu, or press MISC in the System Keypad.
3. Press {BACKUP RESTORE} to display the Backup/Restore Menu.
4. Press {CHECK CARD} to display the Current Backup Menu.
~Check the “Controller files backed up” section to confirm the types of
files present on the Flash Memory Card (e.g., System, Presets,
ScreenPRO-II).
~Check the “VP/SPs backed up” section to confirm the IDs of the
processors that are backed up.
~Press {BACK} to return to the Backup/Restore Menu.
5. On the Device line, select the combination of devices you want to restore:
~Ctrlr — restores up the Controller only.
~VP+SP — restores the Video Processors and ScreenPRO-IIs only.
~Ctrlr+VP+SP — restores the Controller, the Video Processors and any
ScreenPRO-IIs.
6. On the Controller Options line, select which portion of the selected devices you
want to restore. Choose between All, System or Presets.
7. On the VP/SP to Restore line, select the device(s) that you wish to restore.
Choose between All devices, or the ID of a specific device (e.g., 1, 2, 3).
8. Press {RESTORE} to restore the selected system configuration.
At the conclusion of this procedure, your system is completely restored — exactly the way
that you left it when you performed a complete system “backup.”
Note The Barco Backup and Restore utility can be found in the
Encore Presentation System software bundle — available via
download from the Barco website.