Barco 26-0313000-00 manual 186

5. Menu Orientation

System Menu

•DVI Router Output — selects the Aux router output (as assigned on the router’s Output Patch Menu). (Not applicable to PrePRO-II Aux destinations.)

•ImagePRO Input — selects the ImagePRO input to which the router output is connected. (Not applicable to PrePRO-II Aux destinations.)

•Press {RESET} to return all fields to <UNDEFINED>.

Please note the following important points regarding Aux destinations:

•For proper operation, ImagePRO and PrePRO-II devices must be connected to Encore via Ethernet.

Note

Once the connection is made and verified in the Status Menu, the next step is to define the router outputs that will be used with the Aux unit. Once that step is done, use the Destination Setup Menu to define the Aux Destination itself. In Chapter 6, full setup details are provided in the “AUX Destination Setup” section on page 281.

•ImagePRO and PrePRO-II output setups must be performed locally on the units.

•Only one router of each type (Analog, DVI, SDI) can be connected to ImagePRO.

•Only one Analog and one SDI router can be connected to a PrePRO-II unit.

•Automatic “copy down” takes place once the Aux Destination is defined and set up, and once ImagePRO and PresentationPRO-II inputs have been configured.

186 Encore Presentation System • User’s Guide • Rev 04