180 Encore Presentation System • User’s Guide • Rev 04
5. Menu Orientation
System Menu
TBar & Joystick Menu
From the Diagnostics Setup Menu, press {TBAR & JOYSTICK} to display the TBar &
Joystick Diagnostics Menu.
Figure 5-29. TBar & Joystick Diagnostics Menu (sample)
The TBar & Joystick Diagnostics Menu enables you to test the functionality of the TBar
and Joystick. The T-Bar’s range is 0 to 100%. The Joystick’s range is -100 to 100 on each
axis. The following functions are provided:
•Joystick State — Enabled is the default state. Select Disabled if you encounter
an error with the Joystick, and wish to continue operating with the Joystick off. In
this mode, the Rotary Knobs or direct numeric entry can be used to change PIP
or KEY position.
•TBar State — Enabled is the default state. Select Disabled if you encounter an
error with the T-Bar, and wish to continue operating with the T-Bar off. In this
mode, use the AUTO TRANS button.
•Press {RESET TO DEFAULTS} to reset both the T-Bar and Joystick to their
default values.
•Press {RECENTER JOYSTICK} to re-center the Joystick to a true zero value on
all three axes. Use this function if you notice a PIP or KEY moving on its own,
with the Joystick resting at center.
•Press {SET TBAR TOP} to set a true top limit that matches electronic and
physical T-Bar positions. When the Set TBar Top Menu appears, follow the
instructions to set the top limit.
•Press {SET TBAR BOTTOM} to set a true bottom limit that matches electronic
and physical T-Bar positions. When the Set TBar Bottom Menu appears, follow
the instructions to set the bottom limit.
•Press {EXIT} to return to the Diagnostics Setup Menu.
E
X
I
T
TBAR & JOYSTICK DIAGNOSTICS
TBAR
Joystick
Y =
Z =
0.0
X =
0
0
%
0
RECENTER
JOYSTICK SET TBAR
BOTTOM
SET TBAR
TOP
RESET TO
DEFAULTS
N
A
V
A
D
J
TBar State Enabled
Joystick State Enabled
- - - - - - - - - - - - DIAGNOSTICS - - - - - - - - - - - - -