6. System Setup

Destination Setup

pÅêÉÉåmolJff=ïáíÜ=bl`

The Enhanced Output Card (EOC) is an optional (factory installed) card that provides additional output formats, and expands the still store capabilities of ScreenPRO-II. As an input, the EOC takes either the Preview or Program output of ScreenPRO-II (user selectable), and provides the following outputs:

SD/HD SDI

Analog YPbPr

RGBHV

The EOC supports the following resolutions:

NTSC (480i)

PAL (576i)

800 x 600

1024 x 768

1280 x 1024

1400 x 1050

1600 x 1200

1280 x 720p @ 50, 59.94, 60

1920 x 1080i @ 50, 59.94, 60

1920 x 1080p @ 25, 29.97, 30

When the EOC card is installed in an SP-II and the unit is configured as a destination, a button labeled {E OUT} appears on the Output Menu. The Enhanced Output Menu (and its associated sub-menus) enables you to control the following parameters:

EOC Output source (Preview or Program)

Colorspace

Underscan

Sync Settings

Test Patterns

Gamma

Sharpness

Flicker Filter

Please note the following additional points regarding the EOC option:

The EOC provides increased frame store capabilities, from three storable frames to 100 storable frames.

Depending on resolution, frames can be saved and recalled within 6 to 10 seconds.

When the SP-II destination is selected and you access the Frame Grab Menu, frames are captured into one of three temporary storage locations. Once the frame has been captured, press {SAVE}. If extended memory is available, you can select a storage file number from 1 - 100. Without this option, the storage file number is limited to 1 - 3.

280

 

Encore Presentation System • User’s Guide • Rev 04

 

Page 280
Image 280
Barco 26-0313000-00 manual PÅêÉÉåmolJff=ïáíÜ=bl`, Rgbhv