Barco 26-0313000-00 Mfm=ÇàìëíãÉåí=jÉåì=aÉëÅêáéíáçå, Mfm=ÇàìëíãÉåí=jÉåì=cìåÅíáçåë, PIP Adjustment

5. Menu Orientation

PIP Adjustment Menu

mfm=^ÇàìëíãÉåí=jÉåì=aÉëÅêáéíáçå

The figure below illustrates a sample PIP Adjustment Menu:

		PIP ADJUSTMENT
C	H Size < 37.3% >			674	S
L
O					I
N	V Size < 58.9% >			452	Z
E
					E
B	H Position			-34
O
R	V Position			70
D					H
R
					P
S					O
	Move Rate			1.4	S
H
D
O	Key Frame Effect			[ LINEAR ]
W
E	OPERATION:				V
					P
F	JOY Z TO SIZE, X Y TO POSITION
					O
X
					S
	TRACK	H SIZE	V SIZE	RATE

Figure 5-58.PIP Adjustment Menu (sample)

The PIP Adjustment Menu provides tools that enable you to adjust the “active” PIP. To access the menu:

•Select a blue “layer” button in the Layer Control Section.

•Press the PIP button in the Layer Function Section.

On the Controller LC, the menu immediately appears in the right hand Touch Screen Menu. On the Controller SC (with its single Touch Screen), the current “system” menu is replaced by the PIP Adjustment Menu.

mfm=^ÇàìëíãÉåí=jÉåì=cìåÅíáçåë

The following PIP Adjustment Menu functions are provided:

•H Size — adjusts the PIP’s horizontal size. The “%” value is the PIP’s size as a percentage of the screen’s horizontal resolution. The numeric value is the PIP’s width in pixels. To adjust, use the Joystick’s Z-Axis knob or the SIZE rotary knob. See the “PIP Joystick Functions” section on page 215 for details.

•V Size — adjusts the PIP’s vertical size. The “%” value is the PIP’s size as a percentage of the screen’s vertical resolution. The numeric value is the PIP’s height in pixels. To adjust, use the Joystick’s Z-Axis knob or the SIZE rotary knob. See the “PIP Joystick Functions” section on page 215 for more details.

•H Position — indicates the PIP’s position, relative to the horizontal center of the screen (00), as measured from the exact center of the PIP. Thus, the value -34is 34 pixels to the left of center. To adjust, move the Joystick left and right.

•V Position — indicates the PIP’s position, relative to the vertical center of the screen (00), as measured from the exact center of the PIP. Thus, the value 70 is 70 pixels above center. To adjust V Position, move the Joystick up and down.

214 Encore Presentation System • User’s Guide • Rev 04