5. Menu Orientation

System Menu

To use this feature, perform the following steps:

a.Dial in the first output number from which you want to start.

b.Define the VP/SP ID and the VP/SP input to which you want to connect this output.

c.Press {ADD PATCH}. From this point, pressing {PATCH NEXT} will automatically perform the following actions:

Increment to the next Output Number.

Increment the VP/SP Input Layer or the VP/SP ID, if the last VP/SP Input Layer has been defined.

Add the patch.

SFor example, if you start out with the following:

~Router Output: 12

~VP ID: 1

~VP Layer: 3A

Pressing {PATCH NEXT} will automatically add the following data:

~Router Output: 13

~VP ID:1

~VP Layer:3B

Pressing {PATCH NEXT} again will automatically add the following patch data:

~Router Output: 14

~VP ID:2

~VP Layer:1A

In Chapter 6, refer to the “Router Setup” section on page 270 for important information about the system’s default Output Patch Table.

Encore Presentation System • User’s Guide • Rev 04

 

195

 

Page 195
Image 195
Barco 26-0313000-00 manual Encore Presentation System User’s Guide Rev 195