266 Encore Presentation System • User’s Guide • Rev 04
6. System Setup
Return to Factory Default
oÉíìêå=íç=c~Åíçêó=aÉÑ~ìäí
Encore system setup: Step 3.
Prior to performing any setup procedures, it is recommended that you perform a factory
reset — in order to reset all router tables and source mappings. The procedure guarantees
that any previous setups (e.g., those that may have been programmed by other users), do
not remain in system memory.
SPrerequisite — Ensure that you are familiar with the Reset Menu. In
Chapter5, refer to the “System Reset Menu” section on page 175.
Use the following steps to return the system to factory default values:
1. In the System Keypad, press SYSTEM to display the System Menu.
2. Press {RESET} to display the Reset Menu.
3. On the Device line, select CTRLR + VP + SP.
4. On the Reset Option line, select All VPs and SPs
5. On the Reset Type line, select FACTORY.
6. Press {RESET}. When the Reset Confirmation screen appears, press {YES} to
delete all user configurations and reset the system to factory default values.
3