Barco 26-0313000-00 manual PçÑíï~êÉ=sÉêëáçå=NKOO=cÉ~íìêÉë

NK==fåíêçÇìÅíáçå

New Feature Review

pçÑíï~êÉ=sÉêëáçå=NKOO=cÉ~íìêÉë

The following features were implemented in software version 1.22.

•Vertical Blending

Vertical Array blending is supported, and all cabling to the VP and VPx is the same as a standard widescreen setup. In Chapter 6, refer to the “Vertical Blend Setup” section on page 278 for instructions.

•ScreenPRO-II EOC Support

When a ScreenPRO-II is used as a destination, Encore supports the Enhanced Output Card (EOC) option of the ScreenPRO-II. This option is a factory installed card that provides additional output formats, and expands the unit’s still store capabilities. In Chapter 6, refer to the “ScreenPRO-II with EOC” section on page 280 for instructions.

•Enhanced ScreenPRO-II Routing

When a ScreenPRO-II is used as a destination, Encore supports the internal and external routing capability of the ScreenPRO-II. In Chapter 6, refer to the “ScreenPRO-II Destination Setup” section on page 279 for details.

•Input Auto Acquire

By default, the Controller attempts to Auto Acquire an input as soon as the source is selected, provided it does not currently have a saved input config file. In Chapter 5, refer to the “User Preference Menu” section on page 204 for details.

•Custom Borders

In the Border Menu, the Custom Border Menu enables you to select any pre- configured border style as a starting point, and then configure a custom border from a variety of parameters. In Chapter 5, refer to the “Border Menu” section on page 218 for details.

•Preset Recall Options

From the Home Menu, the Preset Recall Menu enables you to select from a variety of preset recall options. In Chapter 5, refer to the “Preset Recall Options Menu” section on page 208 for details.

•Mix, User Effect and User Trans Buttons

In the Transition Functions sections on both controllers, the Mix, User Effect and User Trans (1, 2, and 3) buttons have been implemented. In Chapter 4, refer to the “Transition Functions Section” heading on page 142 for details.

•Patch Next

On the Output Patch Menu, the {PATCH NEXT} soft key enables you to enter output patch data quickly, provided that the physical output connections to the VP and VPx units have been performed logically. In Chapter 5, refer to the “Output Patch Menu” section on page 194 for details.

•Previous Button

In the Preset Section, the Previous button has been implemented. In Chapter 4, refer to the “Preset Section” heading on page 123 for details.

•New Routers Supported

Routers from FSR, AutoPatch and NVision are supported. In Chapter 5, refer to the “Router Specification Menu” section on page 190 for details.

36 Encore Presentation System • User’s Guide • Rev 04