7. Operations

Working with Layers

jçÇáÑóáåÖ=i~óÉêë=lå=mêçÖê~ã

Encore enables you to modify layers directly on Program, without first setting up a "look" on Preview. The mode is typically used for creating a "look" on Program (especially in conjunction with a large screen projector), when the Preview monitor may be too small to realize the desired result.

„Use the following steps to modify layers directly on Program:

1.In the System Keypad, press SYSTEM to display the System Menu.

2.Scroll to the Modify Layers On Program line and turn the mode ON. You can now change PIPs and Keys directly on Program.

Please note:

When you switch sources directly on Program, you may notice a glitch in the image as the scalers recall the source’s file.

If you use camera inputs in this mode, it is recommended that you use an external Genlock signal. Refer to the "Understanding Input File Mapping" section on page 309 for details on source files.

328

 

Encore Presentation System • User’s Guide • Rev 04

 

Page 328
Image 328
Barco 26-0313000-00 manual JçÇáÑóáåÖ=i~óÉêë=lå=mêçÖê~ã