6. System Setup

DSK Setup

8.To configure an Analog source as the DSK:

a.Ensure that your analog source is properly connected to the Video Processor chassis. In Appendix A, refer to the DVI-I Connector Pinouts” section on page 370 for pinout details.

Note

Analog DSKs cannot be configured on ScreenPRO-II destinations.

b.Scroll to the DSK Input line and select the input connector from which the DSK source is pulled.

c.Scroll to the Type line and select Analog.

d.Set the analog source’s format:

Press {FORCE ACQUIRE}, or ...

To manually set the source’s resolution, select the desired format on the Format line, then press {APPLY FORMAT}.

e.(Optional) Adjust H Offset, V Offset, Contrast, Brightness, Sizing and Color Balance as required.

f.Press {SAVE}.

9.Press {KEY} to return to the DSK Adjustment Menu.

10.On the Key Type line, select the type of key desired (Luma or Color).

11.Adjust key parameters as required:

~For a Luma Key, adjust Invert Mode, Clip, Gain, Opacity and Fill Source for the optimum visual key.

~For a color key, pick the desired color, then adjust Red, Green and Blue Color, Threshold, Mask and Opacity.

12.When your DSK is fully adjusted, press SAVE in the System Keypad.

298

 

Encore Presentation System • User’s Guide • Rev 04

 

Page 298
Image 298
Barco 26-0313000-00 manual 298