Barco 26-0313000-00 manual RëáåÖ=`äçåÉ==, RëáåÖ=pï~é=wJçêÇÉê

7. Operations

Working with Layer Functions

Clone

rëáåÖ=`äçåÉ==

The Clone mode is designed for widescreen configurations only. It enables you to make an exact copy of a layer onto the opposite screen. All Key or PIP parameters are cloned — including the shadow, effects, border and size. Once cloned, you can select between a “mirror” or an “offset” clone.

„Use the following steps to clone a layer:

1.Ensure that a PIP or Key is selected in the Layer Control Section, and active for modification in Preview.

2.Ensure that the PIP or Key is positioned fully within the boundaries of an outside destination’s screen. If the PIP or Key straddles the center of the widescreen, the Clone mode cannot be enabled.

SIn a 2 screen blend, the PIP or Key cannot be positioned such that it sits between screens 1 and 2.

SIn a 3 screen blend, the PIP or Key cannot be positioned anywhere within the Screen 2 space.

3.Press Clone to display the Clone Setup Menu.

4.Select the desired clone type — Mirror or Offset.

5.If Offset is selected, adjust the offset (in pixels) as desired.

6.If desired, clone additional layers by repeating the procedure from step 1.

7.Press CUT or AUTO TRANS to transition the new effect to Program.

Note	You can set up and perform a Move in conjunction with a
	cloned image.

Swap

Z-order

rëáåÖ=pï~é=wJçêÇÉê

„In Split mode only, use the following steps to swap the Z-order (priority) of two layers within the same mixer. The function works with two Keys, two PIPs, or one of each.

1.In the selected mixer, ensure that Split mode is enabled.

2.Ensure that you have two layers visible on Preview, with one layer visually overlapping the other.

3.In the Layer Functions Section, press Swap Z-Order. The visual priority (on Preview) of the two layers changes. Note that the layers remain at their current locations — only the priority changes.

4.Transition the new "look" to program with a CUT or AUTO TRANS.

Note	The Swap Z-Orderfunction only works on the layers within a
	selected mixer. You cannot use the function to swap the
	priority of different mixers.

330 Encore Presentation System • User’s Guide • Rev 04