Barco 26-0313000-00 manual PáòáåÖ=jÉåì, Encore Presentation System User’s Guide Rev 155

5. Menu Orientation

Input Menu

páòáåÖ=jÉåì

From the Input Menu, press {SIZING} to display one of two “context sensitive” Sizing Menus — they change depending on the Sampling Mode selected on the Input Menu.

•If 1:1 Sampling is selected, the 1:1 Sizing Menu appears.

•If Oversample is selected, the Oversample Sizing Menu appears. Each menu and function is described below.

1:1 Sizing Menu

The figure below illustrates the 1:1 Sizing Menu.

Note

The 1:1 Sizing Menu can also be accessed from the BG Input Setup Menu, if “Analog” is the background type.

	1:1 SIZING	SRC_1
B	Clock Phase	0
A			N
C			A
K	H Total	800
			V
	H Active	640
	H Position	116
	V Total	[ 525 ]	A
			D
			J
	V Active	475
	V Position	37
S
A
V
E
		FORCE
		ACQUIRE

Figure 5-6.1:1 Sizing Menu (sample)

•ID — this field appears only when the menu is accessed via the BG Input Setup Menu, when “Analog” is selected as the input type. The field displays the ID(s) of the selected destination’s associated Video Processor.

•Clock Phase — sets the system’s A/D converter, allowing you to select where pixels are sampled (ideally, on the pixel’s peak).

~Adjustment range: -16 to 15

For optimum visual results when adjusting high-resolution sources, project a burst test pattern and adjust the sampling for the minimum noise. Refer to the “Test Pattern Menu” section on page 166 for information on test patterns.

•H Total — sets the total pixel count per line.

Note

This field is not adjustable for digital sources (including digital signals on the DVI and BNC connectors), and not adjustable for NTSC and PAL sources, regardless of connection type.

Encore Presentation System • User’s Guide • Rev 04 155