Barco 26-0313000-00 PóëíÉã=jÉåì=aÉëÅêáéíáçå, Encore Presentation System User’s Guide Rev 173

5. Menu Orientation

System Menu

póëíÉã=jÉåì=aÉëÅêáéíáçå

The figure below illustrates the System Menu:

		SYSTEM MENU
H	Modify Layers On Program			Off
O					N
M
					A
E	Tally Mode			Off
					V
R
E
S
E
T					A
SW					D
					J
V
E
R
D
I
A
G
	DEST	NETWORK	INPUT	ROUTER
	SETUP	SETUP	PATCH	SETUP
Figure 5-23.		System Menu (sample)

To access the menu:

•Press {SYSTEM} on the Home Menu, or press System in the Keypad Section. The System Menu enables you to configure the Controller:

•Modify Layers On Program — when enabled, you can change PIPs and Keys directly on Program, without first setting up your “look” on Preview. When disabled, you must use Preview to set up the next look. In Chapter 7, refer to the “Modifying Layers On Program” section on page 328 for details.

•Tally Mode — enables or disables the tally function.

~When enabled, all eight tallies are activated, and can be triggered by pressing a source button.

~When disabled, all tallies are deactivated (but tally setups remain as configured).

In Chapter 6, refer to the “Output Format Setup” section on page 285 for tally setup details. In Chapter 7, refer to the “Working with Tallies” section on page 351 for tally operating instructions.

•Press {RESET} to display the System Reset Menu. Refer to the “System Reset Menu” section on page 175 for details.

•Press {SW VER} to display the Software Version Menu. Refer to the “Software Version Menu” section on page 176 for details.

•Press {DIAG} to display the Diagnostics Setup Menu. Refer to the “Diagnostics Setup Menu” section on page 177 for details.

•Press {DEST SETUP} to display the Destination Setup Menu. Refer to the “Destination Setup Menu” section on page 182 for details.

•Press {NETWORK SETUP} to display the Network Setup Menu. Refer to the “Network Setup Menu” section on page 187 for details.

Encore Presentation System • User’s Guide • Rev 04 173