Barco 26-0313000-00 manual Fåéìí=pçìêÅÉ=m~íÅÜ=jÉåì, Input Source Patch

5. Menu Orientation

System Menu

fåéìí=pçìêÅÉ=m~íÅÜ=jÉåì

From the System Menu, press {INPUT PATCH} to display the Input Source Patch Menu.

	INPUT SOURCE PATCH
B	Source Number	1
A			N
C
			A
K
	Connection Type	MATRIXPRO1	V
	Router Input	1
	Tally Number	1
			A
			D
			J
	Press “ADD PATCH” to log change
	ADD	DELETE
	PATCH	PATCH
Figure 5-35.Input Source Patch Menu (sample)

The Input Source Patch Menu enables you to patch router inputs to specific source buttons on the Controller. The menu also enables you to assign tallies, and select “direct” connections to the Processors (such as those from computers).

Important

The fields that appear on the Input Source Patch Menu change depending upon the selected Connection Type.

The following functions are provided:

•Source Number — selects the source button on the Controller that you want to patch. The selection ranges are 1 - 24 (Controller SC) and 1 - 64 (Controller LC). The source is chosen with the ADJ knob — not with the source buttons.

•Connection Type — determines how the selected source is connected to the Processor — either via router, direct connection, or ScreenPRO-II:

~Via router — choose between MATRIXPRO1, MATRIXPRO2, or a third party router (e.g., SIERRA1, LEITCH1, etc.) as selected on the Router Specification Menu.

~Via ScreenPRO-II with internal routing — choose a ScreenPRO-II by its ID (e.g., SP6).

~Via ScreenPRO-II with external routing — choose ALL SP. This enables all connected ScreenPRO-IIs to switch simultaneously to the same input.

~Via direct connection — choose between DIRECT ANALOG, DIRECT DVI and DIRECT SDI.

188 Encore Presentation System • User’s Guide • Rev 04