Barco 26-0313000-00 manual BÑÑÉÅí=`çãÄáå~íáçåë, PáåÖäÉ=jáñÉê=bÑÑÉÅíë, Single Mixer Effect

NK==fåíêçÇìÅíáçå

System Overview

bÑÑÉÅí=`çãÄáå~íáçåë

A fully-loaded Encore VP or VPx is a unit with three mixer (M/E) boards. A unit configured in this way can scale six input sources to create PIPs and/or Keys. These in turn can be sized and positioned on the screen in real-time.

This section illustrates the many (but not all) combinations of image effects that you can create on 1, 2 and 3 mixer systems. Please note:

•In the following illustrations, the specific layers used in creating each effect are labeled (e.g., PIP 1A, PIP 1B). For example, 1A denotes the first PIP or key on Mixer 1, 1B denotes the second PIP or key on Mixer 1, etc.

•The symbol ↔ denotes a PIP or a key that can transition. For example, PIP 2A ↔ 2B indicates that you can dissolve between sources within the PIP.

The following topics are discussed:

•

•

•

Single Mixer Effects

Dual Mixer Effects

Triple Mixer Effects

páåÖäÉ=jáñÉê=bÑÑÉÅíë

A single Mixer Encore system provides two backgrounds, two scalable layers in the Mixer plus an unscaled DSK. Please note:

•If the DSK is in use, the background cannot transition between A and B — it’s all a matter of “available resources.”

•The DSK and backgrounds are unscaled, in all cases.

In Chapter 7, refer to the “A Word About Resources” section on page 345 for additional information.

•Single Mixer Effect 1

This effect includes a non-transitioning background (either A or B), one transitioning PIP and the DSK.

Background

PIP

1A ↔ 1B

DSK

Figure 1-6.Single Mixer Effect 1 Diagram

28 Encore Presentation System • User’s Guide • Rev 04