Barco 26-0313000-00 manual Program 2 Out Analog

2. Hardware Orientation

Video Processors

3)Program 2 Out Analog

One 15-pin D connector is provided for the Analog Program 2 Output. This output is identical to the analog Program 1 Output, except that it does not include edge feathering and data doubling components. In Appendix A, see the “Analog 15-pin D Connector” section on page 371 for pinouts.

4)Program 2 Out DVI

One DVI connector is provided for the Digital Program 2 Output. This output is identical to the digital Program 1 Output, except that it does not include edge feathering and data doubling components. In Appendix A, refer to the “DVI Connector Pinouts” section on page 369 for pinouts.

5)Program 1 Out DVI

One DVI connector is provided for the Digital Program 1 Output. This output includes all edge feathering and data doubling components, and is designed for a digital connection to your projector. In Appendix A, refer to the “DVI Connector Pinouts” section on page 369 for pinouts.

6)Program 1 Out Analog

One 15-pin D connector is provided for the Analog Program 1 Output. This output includes all edge feathering and data doubling components, and is designed for an analog connection to your projector. In Appendix A, see the “Analog 15-pin D Connector” section on page 371 for pinouts.

7)Program Out HD/SDI

One BNC connector is provided for the HD/SDI (High Definition/Serial Digital Interface) output. Refer to the “Program Output Notes” section on page 57 for additional information on video outputs.

8)Program Link Out

One DVI connector is provided for the Program Link Output. To ensure proper data doubling in wide screen configurations, this output connects to the Program Link Input on another VPx.

~In Chapter 3, refer to the “Program and Source Link Connections” section on page 98 for details on the proper use of the connectors in wide screen configurations.

~In Appendix A, refer to the “DVI Connector Pinouts” section on page 369 for pinouts.

9)Program Link In

One DVI connector is provided for the Program Link Input. To ensure proper data doubling in wide screen configurations, this input connects to the Program Link Output from another VP (or VPx).

~In Chapter 3, refer to the “Program and Source Link Connections” section on page 98 for details on wide screen configurations.

~In Appendix A, refer to the “DVI Connector Pinouts” section on page 369 for pinouts.

Encore Presentation System • User’s Guide • Rev 04 49