Barco 26-0313000-00 manual Qê~åëáíáçå=cìåÅíáçåë=pÉÅíáçå, Mix, Effect

4. Controller Orientation

Controller Sections

qê~åëáíáçå=cìåÅíáçåë=pÉÅíáçå

The figures below illustrate the Transition Functions Section on each Controller.

Mix	User	Mix	Swap	Toggle	Move	Shuffle	Ext	Black
	Effect	Source					Trigger	Preview

TRANSITION FUNCTIONS

Figure 4-27.Transition Functions Section, Controller SC

	User	User	User	Mix					Ext	Black
Mix	Trans	Trans	Trans		Swap	Toggle	Move	Shuffle
				Source					Trigger	Preview
	1	2	3

TRANSITION FUNCTIONS

Mix

User

Effect

User

Trans

1

Mix

Source

Figure 4-28.Transition Functions Section, Controller LC

The buttons in the Transition Functions Section enable you to manipulate the transition itself. Descriptions of each button are provided below:

Mix — press to change the current transition type to a mix. The transition rate is defined on the User Preference Menu. In Chapter 5, refer to the “User Preference Menu” section on page 204 for details.

User Effect — (Controller SC only). Press to change the current transition type to a mix or a selected wipe, at a selected transition rate. All options for the User Effect button are defined on the User Preference Menu. In Chapter 5, refer to the “User Preference Menu” section on page 204 for details.

User Trans 1, 2, 3 — (Controller LC only). Press to change the current transition type to a mix or a selected wipe, at a selected transition rate. All options for the three User Trans buttons are defined on the User Preference Menu. In Chapter 5, refer to the “User Preference Menu” section on page 204 for details.

Mix Source — in “Mix Mode” for a given layer (with the Split button off), press Mix Source to co-locate both PIPs in the mixer.

•After a transition, layers A and B will be exactly the same size — in exactly the same position.

•Prior to a transition, the PIP on Preview can be changed in any manner — even if the other side of the mixer is on Program.

•Mix Source and Swap modes are mutually exclusive.

In Chapter 7, refer to the “Understanding Split and Mix Modes” section on page 321 for complete instructions on using mix mode.

142 Encore Presentation System • User’s Guide • Rev 04