Barco 26-0313000-00 manual PçìêÅÉ=ÇàìëíãÉåí=jÉåì=cìåÅíáçåë, For Input Source Adjustments

5. Menu Orientation

Source Adjustment Menus

pçìêÅÉ=^ÇàìëíãÉåí=jÉåì=cìåÅíáçåë

The following Source Adjustment Menu functions are provided:

•H Size — adjusts the source’s horizontal size. The “%” value indicates size as a percentage of the original PIP or Key’s horizontal resolution. The numeric value is the source’s width in pixels. To adjust, use the Joystick’s Z-Axis knob or the SIZE knob. See the “Source Joystick Functions” section on page 236 for details.

•V Size — adjusts the source’s vertical size. The “%” value indicates size as a percentage of the original PIP or Key’s vertical resolution. The numeric value is the source’s height in pixels. To adjust, use the Joystick’s Z-Axis knob or the SIZE knob. See the “Source Joystick Functions” section on page 236 for details.

•H Position — indicates the source’s horizontal position, relative to its default horizontal position (00) with no offset. Thus, the value 50 is 50 pixels to the right of its default position. To adjust, move the Joystick left and right along the X-Axis.

•V Position — indicates the source’s vertical position, relative to its default vertical position (00) with no offset. Thus, the value -10is 10 pixels below its default position. To adjust, move the Joystick up and down along the Y-Axis.

•Move Rate — adjusts the rate (in 0.1 second increments) for programmed Key or PIP movement, from keyframe to keyframe. To adjust, select the RATE radio button and twist the Joystick Z-Axis knob.

•Key Frame Effect — indicates the “motion type” that is used to move the PIP or Key from point to point.

~If no move is programmed, the display reads [N/A].

~If a move is programmed, the motion type is shown (e.g., [Linear]). The motion type is selected on the Effects Menu.

For Input Source Adjustments:

•Press {BORDR} to display the Border Menu. Refer to the “Border Menu” section on page 218 for details.

•Press {SHDOW} to display the Shadow Menu. Refer to the “Shadow Menu” section on page 219 for details.

•Press {EFX} to display the Image Effects Menu. Refer to the “Image Effects Menu” section on page 220 for details.

For Key Source Adjustments:

•Press {STATS} to display the Status Menu. Refer to the “Status Menu” section on page 212 for details.

•Press {KEY} to display the Key Menu. Refer to the “Key Menu Description” section on page 225 for details.

•Press {MATTE} to display the Matte Menu. Refer to the “Matte Menu” section on page 228 for details.

•Press {EFX} to display the Image Effects Menu. Refer to the “Image Effects Menu” section on page 220 for details.

Encore Presentation System • User’s Guide • Rev 04 235