Barco 26-0313000-00 manual Lìíéìí=m~íÅÜ=jÉåì, Output Patch MATRIXPRO1

5. Menu Orientation

System Menu

lìíéìí=m~íÅÜ=jÉåì

From the Router Specification Menu, press {OUTPUT PATCH} to display the Output Patch Menu.

B A C K

OUTPUT PATCH	MATRIXPRO1
Router Output	1
Device ID	VP 1
VP Input	1A
Mixer Layer	[ 2A ]
VP Input is mapped to

MATRIXPRO1 Output 1

Set Device ID to NONE to define the Router Output as an AUX.

N A V

A D J

ADDDELETE

PATCHPATCH

Figure 5-40.Output Patch Menu (sample)

After a router is selected on the Router Specification Menu, the Output Patch Menu enables you to associate router and D/A outputs with VP IDs and inputs. This process creates a unique “Output Patch Table” for each defined router.

The following functions are provided:

•Router Output — selects the specific router output that is being patched. The selectable range is 1 to the number of outputs defined in the Router Specification Menu.

•Device ID — selects the physical VP ID to which the router’s output will be connected. The selectable range is 1 - 32.

Note

If asterisks appear around the Device ID (e.g., * 6 *), the ID has not been detected by the system.

•VP Input — selects the physical VP input to which the router’s output is being patched. Selections are 1A, 1B, 2A, 2B, 3A, and 3B.

•Mixer Layer — this non-selectable field shows the Mixer Layer button (on the Controller) that is associated with the selected VP input.

•Press {ADD PATCH} to confirm any change that you make on menu. As you dial through patch choices, the status at the bottom of the menu shows if the current choice is already in use.

•Press {DELETE PATCH} to delete all “Output Patch Table” registers for the selected router output. The “Delete Patch” procedure is a good starting point if you are uncertain about specific output patch settings.

•When a router’s physical output connections to the VPs have been performed in a logical order, press {PATCH NEXT} to facilitate quick data entry.

194 Encore Presentation System • User’s Guide • Rev 04