5. Menu Orientation

Miscellaneous Menu

Please note the following important points regarding EDID:

For the external computer to correctly see the EDID data, first turn on Encore power. Then connect the DVI cable from the computer’s video card to one of Encore’s mixer layers. Then, boot the computer.

Once EDID programming is complete, you will be prompted to power down the external computer, power it back on again, and then ensure that the computer’s format is set to match.

The system’s EDID PROM is not reset to any default during a factory reset. To change the EDID, you must use the EDID DVI Input Format Menu.

Encore Presentation System • User’s Guide • Rev 04

 

201

 

Page 201
Image 201
Barco 26-0313000-00 manual Encore Presentation System User’s Guide Rev 201