Barco 26-0313000-00 Joystick Section, Machine Control Section, Console Lighting, Preset Section

4. Controller Orientation

Controller LC Front Panel

3)Alphanumeric Keypad

The Alphanumeric Keypad is reserved for numeric functions. This section is only available on the LC Controller. Refer to the “Alphanumeric Keypad” section on page 119 for additional details.

4)Joystick Section

The Joystick Section includes a 3-axis joystick that enables you to adjust PIPs, Keys and additional system parameters. The section also includes dedicated buttons that change the Joystick’s function. Refer to the “Joystick Section” heading on page 120 for details.

5)Machine Control Section

The Machine Control Section is reserved for controlling external devices. This functionality is only available on the Controller LC. Refer to the “Machine Control Section” heading on page 122 for details.

6)Console Lighting

The Console Lighting Section enables you to control the three low-voltage “script” lights. Refer to the “Console Lighting” section on page 122 for details.

7)Preset Section

The Preset Section enables you to store and recall Controller setups, called “presets.” Each button represents a single “look” of the overall projected image. On the Controller LC, you have access to 900 presets — 30 pages of 30 presets each. Refer to the “Preset Section” heading on page 123 for details.

8)Destination Bus

The Destination Bus enables you to route the Controller’s output to one or more destinations, such as projectors, ScreenPRO-IIs and auxiliary monitors. On the Controller LC, 32 destinations are available. Refer to the “Destination Bus” section on page 125 for details.

9)Source Selection Bus

The Source Selection Bus allows you to choose the sources that are routed into PIPs and Keys. On the Controller LC, up to 64 sources can be mapped to buttons. Refer to the “Source Selection Bus” section on page 126 for details.

10)Layer Control Section

The Layer Control Section enables you to assign sources to PIPs and Keys on each layer. Here, you control the overall look on Preview, prior to transitioning the setup to Program. On the LC, up to 12 layers on six mixers can be controlled.

Refer to the “Layer Control Section” heading on page 128 for details.

11)Layer Functions Section

When a layer is active (and blinking) in the Layer Control Section, all buttons in the Layer Function Section now apply to that selected layer, enabling you to change its mode and manipulate the source. Refer to the “Layer Functions Section” heading on page 131 for details.

12)Live Switch Section

The two buttons in the Live Switch Section temporarily change the function of the Source Selection Bus, enabling you to take sources “live” to Program. Refer to the “Live Switch Section” heading on page 134 for details.

Encore Presentation System • User’s Guide • Rev 04 109