
English
MAINTENANCE
Note:
The information contained in this Manual is designed to assist you in the safe maintenance of the Tool.
Some illustrations in this Manual may show details or at‑ tachments that differ from those on your own Tool.
MAINTENANCE AND INSPECTION
Read section titled “SAFETY” (page
WARNING
•Disconnect air hose and remove all fasteners from Tool when:
1)doing maintenance and inspection; and
2)clearing a jam.
1. Resetting the Piston / Driver Blade
Disconnect from the Air source.
Unload all of the fasteners from the magazine.
Make sure there are no fasteners in the guide chamber. Reconnect the air source to the Tool.
While squeezing the safety lever, push the ram down and hold for three (3) seconds and release.
Load fasteners and proceed with the operation of the Tool.
2. Inspecting the Magazine
oDISCONNECT THE AIR HOSE
oClean the magazine. Remove dust or wooden tips which may have accumulated in the magazine.
3. Storing
oWhen not in use for an extended period, apply a thin coat of the lubricant to the steel parts to avoid rust.
oDo not store the Tool in a cold weather environment. When not in use, the Tool should be stored in a warm and dry place.
oKeep out of reach of children.
— 27 —