English

SAFETY

IMPORTANT SAFETY INSTRUCTIONS

FOR USING TOOLS

READ ALL INSTRUCTIONS

DANGER

1.OPERATORS AND OTHERS IN WORK AREA MUST WEAR SAFETY GLASSES WITH SIDE SHIELDS.

When operating the Tool, always wear eye safety glasses with side shields, and make sure others in the work area wear safety glasses, too.

Safety glasses must conform to the requirements of American National Standards Institute, ANSI Z87.1 and provide protection against flying particles both

from the front and side.

The employer must enforce the use of safety glasses by the Tool operator and others in work area.

2.NEVER USE OXYGEN OR OTHER BOTTLED GASES. EXPLOSION MAY OCCUR.

Never use oxygen, combustible gases or any other bottled gases as a power source for the Tool.

Use of the above gases is dangerous, as the Tool will explode.

Use only clean, dry, regulated compressed air.

WARNING

3.NEVER POINT TOOL AT YOURSELF OR OTHERS IN WORK AREA. Always assume the Tool contains fasteners.

Never point the Tool at yourself, toward yourself or others whether it contains fasteners or not.

If fasteners are mistakenly driven, it can

lead to severe injuries.

Never engage in horseplay with the Tool.

Respect the Tool as a working implement.

— 4 —

Page 4
Image 4
Hitachi N5009AF, NT50AF manual Important Safety Instructions For Using Tools, Read ALL Instructions