Barco 26-0313000-00 manual 112

4. Controller Orientation

Controller SC Front Panel

4)Preset Section

The Preset Section enables you to store and recall Controller setups, called “presets.” On the Controller SC, you have access to 64 presets — 8 pages of 8 presets each. Refer to the “Preset Section” heading on page 123 for details.

5)Destination Bus

The Destination Bus allows you to route the Controller’s output to one or more destinations. On the Controller SC, six destinations are available. Refer to the “Destination Bus” section on page 125 for details.

6)Group Control Section

The Group Control Section enables you to take one or more destinations and assign them to a single button. On the Controller SC, four Group buttons are available. See the “Group Control Section” heading on page 137.

7)Source Selection Bus

The Source Selection Bus allows you to choose the sources that are routed into PIPs and Keys. On the Controller SC, up to 24 sources can be mapped to individual buttons. See the “Source Selection Bus” section on page 126.

8)Layer Functions Section

When a layer is active in the Layer Control Section, all buttons in the Layer Functions Section apply to that layer, enabling you to manipulate the source. Refer to the “Layer Functions Section” heading on page 131 for details.

9)Live Switch Section

The two buttons in the Live Switch section temporarily change the function of the Source Selection Bus, enabling you to take sources “live” to Program. Refer to the “Live Switch Section” heading on page 134 for details.

10)Console Lighting

The Console Lighting Section enables you to control the two low-voltage “script” lights. See the “Console Lighting” section on page 122 for details.

11)Program Preset Section

The buttons in the Program Preset Section allow you to take a preset directly to Program, without first viewing it on Preview. Refer to the “Program Preset Section” heading on page 139 for details.

12)Layer/Aux Control Section

The buttons in the Layer/Aux Control Section provide additional “on air” layer control. Refer to the “Layer/Aux Control Section” heading on page 140.

13)Transition Functions Section

The buttons in the Transition Functions Section enable you to manipulate the current transition and mode. Refer to the “Transition Functions Section” heading on page 142 for details.

14)Transition Section

The Transition Section includes the T-Barfor manually mixing sources on and off Program, plus dedicated buttons for cuts, automatic transitions and sequencing. Refer to the “Transition Section” heading on page 135 for details.

15)Layer Control Section

The Layer Control Section enables you to assign sources to PIPs and Keys on each layer. On the Controller SC, six layers on three mixers can be controlled. See the “Layer Control Section” heading on page 128 for details.

112 Encore Presentation System • User’s Guide • Rev 04