Encore Presentation System • User’s Guide • Rev 04 35
NK==fåíêçÇìÅíáçå
New Feature Review
kÉï=cÉ~íìêÉ=oÉîáÉï
This section lists the new features that have been implemented in recent versions of
Encore software. Reference links are provided.
Software Version 1.24 Features
Software Version 1.22 Features
Software Version 1.19 Features

pçÑíï~êÉ=sÉêëáçå=NKOQ=cÉ~íìêÉë

The following new features have been implemented in software version 1.24.
Stacked Configuration Support
Stacked configuration support has been added to the Encore Controller SC.
~In Chapter 3, refer to the “Single Screen Stack Configuration” section
on page80 for instru ctions on installing single screen stack
configurations, and the “Wide Screen Stack Configuration” section on
page84 fo r instructions on wide screen stack configurations.
~In Chapter 6, refer to the “Standard and Stack Destination Setup
section on page27 7 for stack setup instructions.
Feature Enhancements
The following feature and interface enhancements are provided in the version:
~ImagePRO AUX transitions are now smooth when switching between
any inputs routed to an ImagePRO. This feature requires ImagePRO
software 2.43 or higher.
~For analog NTSC and PAL inputs, the default sync slice is now 80mV.
This change improves the system’s ability to maintain a stable lock to
video sources where signal integrity is less than ideal.
~Support has been added for Grass Valley native protocol.
~Programmable DVI output sync polarity adjustments have been added.
In Chapter 5, refer to the “Settings Menu” section on page 165.
~The following input and output resolutions have been added:
1280x720 @60
1280x720 II @60
1280x800 @60
1280x800 II @60
1360x768 @60
1440x900 @60, @75, @85
1680x1050 @60
1920x1080pSF @29.97, @30
1920x1200 @50, @59.94, @60
2048x1200 @59.94
In AppendixA, refer to the “Input and Output Resolutions” section on
page375 for a comp lete list of all input and output resolutions.