Encore Presentation System • User’s Guide • Rev 04 117
4. Controller Orientation
Controller Sections
póëíÉã=hÉóé~Ç
The figure below illustrates the System Keypad, which provides direct access to system
configuration and setup menus. The keypads for the models LC and SC are slightly
different in functionality, as noted below.
Figure 4-4. System Keypads for LC and SC Controllers
Following are descriptions of each button:
Input — press to display the Input Menu on the Touch Screen. This menu is used to
adjust physical sources connected to the VP or VPx, and to set configuration options for the
selected input. In Chapter5, refer to the “Input Menu” section on page 148 for details.
Output — press to display the Output Menu. This menu allows you to configure Encore’s
outputs (or Destinations). Setup parameters include screen resolution, wide screen setup,
overlap, feathering and test patterns. In Chapter 5, refer to the “Output Menu” section on
page158 for details.
System — press to display the System Menu. This menu accesses setup functions such
as destination setup, router control, network setup, input patching, diagnostics and reset
functions. In Chapter5, refer to the “System Menu” section on page 172 for details.
Misc — press to display the Miscellaneous Menu. This menu accesses a variety of
functions such as backup and restore, copy setups, display settings, Video Processor IDs,
EDID setup and user preferences. In Chapter 5, refer to the “Miscellaneous Menu
section on page 196 for details.
Input Output System Misc
Presets Effects Seqs User
Keys
Machine
Control
Status Cancel Save
Input Output System Misc
Presets Effects Seqs
Status Cancel Save

Configuration Panel

Controller LC Controller SC
Input
Output
System
Misc