4. Controller Orientation

Controller Sections

3)Touch Screen

All menus and functions can be accessed in a variety of ways:

~Touch the desired label on the Touch Screen itself (for example, the {BORDER} button) to access the menu.

~Press a Softkey that is directly adjacent to a label.

~Use the top NAV knob to move the highlight to the desired line, then use the ADJ rotary knob (or the Joystick’s Z-Axis Knob) to adjust the value.

~Touch a particular line to move the highlight to that line, then use the ADJ rotary knob (or the Joystick’s Z-Axis Knob) to adjust the value.

~Press a button in the System Keypad to jump directly to a top level menu. Refer to the “System Keypad“section on page 117 for details.

Please note the following important points regarding the adjustment of parameters:

If you adjust a parameter using the ADJ knob or the Joystick’s Z-Axis Knob, there is no Enter button. Using this method, the modified value is immediately active in Preview.

If you adjust a parameter using the Alphanumeric Keypad (on the Controller LC only), press Enter on the keypad to activate the value. In Chapter 7, refer to the “Using the Alphanumeric Keypad” section on page 310 for details.

116

 

Encore Presentation System • User’s Guide • Rev 04

 

Page 116
Image 116
Barco 26-0313000-00 manual Touch Screen