Barco 26-0313000-00 BÑÑÉÅíë=jÉåì, Encore Presentation System User’s Guide Rev 209, Effects Menu

5. Menu Orientation

Effects Menu

bÑÑÉÅíë=jÉåì

The figure below illustrates a sample Effects Menu:

		EFFECTS MENU
H	Destination	[ 2 ]
O			N
M			A
E	Key Frame Effect	LINEAR
			V
	Transition Rate	1.0
	Transition Type	Mix
			A
			D
			J

Figure 5-53.Effects Menu (sample)

To access the menu:

•Press EFFECTS on the Home Menu, or press Effects in the Keypad Section.

The Effects Menu allows you to modify and manage effects on a destination by destination basis, including the ability to define keyframes, paths and effect properties. The following functions are provided:

•Destination — indicates the currently selected destination (as chosen on the Destination Bus).

•Key Frame Effect — selects the type of point-to-point motion for a “move.” Choose between LINEAR, LINEAR ACCL, ARCH CW, ARCH CCW, BMRNG CW, and BMRNG CCW.

•Transition Rate — sets the auto-transition rate that is used when the Auto Trans button is pressed. The transition value is in 0.1 second increments.

•Transition Type — sets the transition type. Choose between Mix, Wipe Right, Wipe Left, Wipe Down, Wipe Up, Curtain Open, Curtain Close, Box In and Box Out.

Note

Widescreen destinations only support two wipe patterns: Wipe Up and Wipe Down.

•Transition Edge Width — When a Wipe is selected, this field sets the transition’s edge type. The range (in pixels) is from 0 to 256.

In Chapter 7, refer to the “Working with Transitions” section on page 343 for details.

Encore Presentation System • User’s Guide • Rev 04 209