Encore Presentation System • User’s Guide • Rev 04 133
4. Controller Orientation
Controller Sections
Preview OSD
Clear Layer — press to remove the currently selected (blinking) layer from Preview — in
preparation for transitioning it off Program. The button can be used to clear backgrounds,
PIPs, Keys and the DSK. In Chapter7, refer to the “Clearing Layers from Program
section on page 327 for instructions.
All — press All + Clear Layer (or Clear Layer + All) to remove all layers from Preview —
in preparation for transitioning them all off Program. In Chapter 7, refer to the “Clearing
Layers from Program” section on page 327 for instructions.
Freeze — press to freeze a PIP or Key.
In Split Mode, PIPs or Keys can be frozen on both Program and Preview.
In Mix Mode, PIPs or Keys can only be frozen on Preview — prior to transitioning
them to Program.
In Chapter 7, refer to the “Using Freeze” section on page 332 for instructions.
Note The Preview OSD function is currently not implemented.
Preview
OSD
Clear
Layer
All
Freeze