178 Encore Presentation System • User’s Guide • Rev 04
5. Menu Orientation
System Menu
Widescreen Link Diagnostics Menu
From the Diagnostics Setup Menu, press {LINKS} to display the Widescreen Link
Diagnostics Menu.
Figure 5-27. Widescreen Link Diagnostics Menu (sample)
The Widescreen Link Diagnostics Menu enables you to test the program and source link
cables that are required for wide screen operation. This menu only appears when a
defined wide screen destination is active.
Press {TEST LINKS} to perform the link diagnostics. You will be asked to confirm
your selection.
When the test is complete, Preview and Program outputs are fully restored and
the test results are displayed on the menu. If any cables fail, the complete
connection list will be shown in the display for reference when troubleshooting the
cable connections.
B
A
C
K
A
D
J
WIDESCREEN LINK DIAGNOSTICS
Widescreen Destination 1
Select a Widescreen Destination
and press TEST LINKS to start
the Diagnostic procedure.
MAKE SURE ALL CONNECTIONS ARE
MADE WITH DVI-I DUAL LINK
CABLES.
TEST
LINKS
Note This test affects the Program output.