6. System Setup

Restore from Flash Memory Card

oÉëíçêÉ=Ñêçã=cä~ëÜ=jÉãçêó=`~êÇ

 

Encore system setup: Step 6 (optional)

6

In this procedure, you will restore your system configuration from flash memory — provided

that you previously backed up your system to the flash memory card.

 

 

S Prerequisite — Ensure that you are familiar with the Backup/Restore

 

 

Menu. In Chapter 5, refer to the “Backup/Restore Menu” section on

 

 

page 206 for details.

 

„ Use the following steps to restore your system from the flash memory card:

 

1.

Ensure that your flash memory card is properly inserted in the Controller’s

 

 

MEMORY CARD slot.

 

2.

In the System Keypad, press MISC to access the Miscellaneous Menu.

 

3.

Press {BACKUP RESTORE} to display the Backup/Restore Menu.

 

4.

Press {CHECK CARD} to display the Current Backup Menu.

 

 

~ Check the “Controller files backed up” section to confirm the types of

 

 

files present on the Flash Memory Card (e.g., System, Presets,

 

 

ScreenPRO-II).

 

 

~ Check the “VP/SPs backed up” section to confirm the IDs of the

 

 

processors that are backed up.

 

 

~ Press {BACK} to return to the Backup/Restore Menu.

 

5.

On the Device line, select Ctrlr+VP+SP to perform a complete “restore.”

 

6.

On the Controller Options line, select All.

 

7.

On the VP/SP to Restore line, select All.

 

8.

Press {RESTORE} to restore the selected system configuration.

 

At the conclusion of this procedure, your system is completely set up — exactly the way

 

that you left it when you performed a complete system “backup.” No further setup

 

operations are required.

Please continue with system operations. Refer to the “Operations” chapter on page 301 for details.

Encore Presentation System • User’s Guide • Rev 04

 

269

 

Page 269
Image 269
Barco 26-0313000-00 manual OÉëíçêÉ=Ñêçã=cä~ëÜ=jÉãçêó=`~êÇ