7. Operations

Working with Groups

råäÉ~êåáåÖ=~=dêçìé

„Use the following steps to unlearn (completely clear) a group button — so that it no longer lights:

1.Controller LC:

a.Clear all destinations on the Destination Bus (Clear + All).

b.Press and hold Learn.

c.Press the desired Group button. Here, you are essentially programming the button with “no destinations.”

2.Controller SC:

a.Press and hold the Group button that you want to unlearn.

b.On the Destination Bus, toggle all destination(s) off.

c.Release the Group button.

dêçìé=kçíÉë

Please note the following points regarding groups:

If you enable a group that fully contains all the destinations from another group, both group buttons will light.

S Group 1 contains destinations 1 and 2, Group 2 contains destinations 3 and 4, and Group 3 contains destinations 1, 2, and 4. When you press the Group 3 button by itself, it lights, and the Group 1 button also lights — because both destinations in Group 1 are fully included in Group 3.

314

 

Encore Presentation System • User’s Guide • Rev 04

 

Page 314
Image 314
Barco 26-0313000-00 manual RåäÉ~êåáåÖ=~=dêçìé, Dêçìé=kçíÉë