Barco 26-0313000-00 manual Press Back to return to the Router Specification Menu

6. System Setup

Router Setup

15.Test communications:

~For serial and Ethernet controlled routers, press {TEST COMM}.

~For Lantronix devices, press {DISCOVER LTRX}. Note that {TEST COMM} can be used for Routers connected to Lantronix devices once the Lantronix device has been discovered and properly set up.

Note

If the message “Communication Failed” appears, take the necessary actions to rectify the communications error and repeat this step.

16.Press {BACK} to return to the Router Specification Menu.

17.Press {OUTPUT PATCH} to display the Output Patch Menu for the selected router. On the top line, confirm the router name.

Standard (non-stack) configurations — please note:

~On a 3 M/E Video Processor, the first six router outputs have been automatically patched to inputs 1A through 3B respectively.

~On a 2 M/E Video Processor, the first four router outputs have been automatically patched to inputs 1A through 2B respectively.

~On a 1 M/E Video Processor, the first two router outputs have been automatically patched to inputs 1A and 1B.

The table below illustrates the default router output patch for standard (non-stack) configurations:

Table 6-1.Default output patch table — standard configurations

Router Output	VP Input	Mixer Layer
1	1A	3A
2	1B	3B
3	2A	2A
4	2B	2B
5	3A	1A
6	3B	1B
7	Undefined	Undefined
8	Undefined	Undefined

If you have a Folsom MatrixPro Router and you connect the router outputs per the table above, no setup is necessary on the Output Patch Menu — unless you specifically want to patch the outputs in a different way. This “default” configuration is ideal for most single-screen applications with one Processor, or wide screen applications with multiple Processors.

Encore Presentation System • User’s Guide • Rev 04 271