Barco 26-0313000-00 manual Wide Screen Settings, Total Projectors

5. Menu Orientation

Output Menu

Wide Screen Settings Menu (H Array)

The Wide Screen Settings Menu (H Array) provides tools for wide screen setup and adjustment for horizontal arrays of destinations.

	WIDE SCREEN SETTINGS
B
	Total Projectors	[ 2 ]
A			N
C			A
K	Total H Res	1808
			V
	Total V Res	[ 768 ]
	Background Format	Edge-Butted
	Marker Mode	On	A
			D
	Overlap Width	240	J
	Alignment Test Pattern	Off
	Data Doubling	On
	Justification	Center
	TEST	FEATHER
	PATTERN	SETUP

Figure 5-19.Sample Wide Screen Settings Menu (H Array)

The following functions are provided:

•Total Projectors — indicates the total number of Processors as defined in the wide screen configuration. This field is for information only.

•Total H Res — sets the total number of horizontal pixels in the overall wide screen display. The formula is:

#screens * horizontal output resolution - (overlap width * (# screens - 1))

SIf two screens are used, each with an output resolution of 1024 x 768 and an overlap of 200 pixels, the Total H Res is:

2 * 1024 - (200 * 1) = 1848

As you adjust the Total H Res, the Overlap Width value tracks and the wide screen markers adjust accordingly.

•Total V Res — displays the vertical resolution. In an array that is exclusively horizontal, this field is fixed.

•Background Format — selects the method by which your background graphics were originally produced:

~Edge-butted— choose this option if your background graphics were produced with no pre-data doubling (e.g., typically from a multi-head graphics card).

~Overlapped — choose this option if your backgrounds were produced using pre-data doubling (e.g., from a Dataton® Watchout system).

168 Encore Presentation System • User’s Guide • Rev 04