6. System Setup

Programming EDID

mêçÖê~ããáåÖ=bafa

 

Encore system setup: Step 5

5

The EDID (Extended Display Identification Data) programming procedure is a prerequisite

for background and DSK setup. The procedure guarantees proper communications at the

 

preferred resolution between Encore’s DVI inputs and your system’s PCs.

 

 

S Prerequisite — Ensure that you are familiar with the EDID DVI Input Format

 

 

Menu. In Chapter 5, refer to the “EDID DVI Input Format Menu” section on

 

 

page 200.

 

„ Use the following steps to program Encore’s EDID:

 

1.

Ensure that Encore’s output format matches your projector’s native resolution. In

 

 

Chapter 5, refer to the “Output Menu Functions” section on page 160 for details.

 

2.

Ensure that the computer(s) that you wish to use as background and DSK

 

 

source(s) are capable of supporting the selected output resolution.

 

3.

Ensure that all DVI inputs to each Video Processor are disconnected.

 

4.

In the System Keypad, press MISC to access the Miscellaneous Menu.

 

5.

Press {EDID} to display the EDID DVI Input Format Menu.

 

6.

On the Destination line, select the individual destination whose EDID you wish to

 

 

program, or select ALL if all destinations will be using the same resolution.

 

7.

Note the Current EDID format line, which displays the EDID format that resides

 

 

in memory. If this format is already set to the desired resolution, no programming

 

 

is required. You can exit this procedure, and continue with the next setup step.

 

8.

If a new resolution is required, scroll to the Format line and use the ADJ knob to

 

 

select the preferred EDID format.

 

9.

Press {PROGRAM EDID} to display a warning message. Press {CONTINUE} to

 

 

continue with the procedure.

 

10.

Once EDID programming is complete, reconnect each external computer and

 

 

power it back on.

 

11.

On each PC’s desktop, right-click to display the Display Properties Window.

 

12.

Select the Settings Tab, and verify that the PC’s resolution matches that which

 

 

you just programmed into EDID. If not, set the resolution as required.

 

13.

Repeat steps 6 through 12 for each additional Encore destination.

268

 

Encore Presentation System • User’s Guide • Rev 04

 

Page 268
Image 268
Barco 26-0313000-00 manual MêçÖê~ããáåÖ=bafa, System Keypad , press Misc to access the Miscellaneous Menu