Barco 26-0313000-00 Encore Presentation System User’s Guide Rev 169, Total Projectors 2W x 2H

5. Menu Orientation

Output Menu

•Marker Mode — enables and disables the wide screen markers, to show the boundaries of active data. In Chapter 7, refer to the “Wide Screen Markers” section on page 305 for details.

Note

Markers apply to horizontal blends (e.g., 3W x 1H), and to horizontal + vertical arrays (e.g., 2W x 2H), but do not apply to vertical blends (e.g., 1W x 3H).

•Overlap Width — sets the horizontal overlap (in pixels) between projectors. As you adjust, the Total H Res value tracks, and wide screen markers adjust.

•Alignment Test Pattern — selects the desired alignment test pattern used for performing projector lens shift and registration adjustments.

•Data Doubling — enables or disables data doubling. Typically, the function is only disabled when unscaled background sources are pre-data doubled. In Chapter 3, refer to the “Overview of Edge-Blending Technology” section on page 98 for more information.

•Justification — sets the desired wide screen justification, either Center or Left. Once set, wide screen markers adjust accordingly.

•Press {TEST PATTERN} to display the Test Pattern Menu. Refer to the “Test Pattern Menu” section on page 166 for details.

•Press {FEATHER SETUP} to display the Feather Setup Menu. Refer to the “Feather Setup Menu” section on page 171 for details.

Wide Screen Settings Menu (V Array)

The Wide Screen Settings Menu (V Array) provides tools for wide screen setup and adjustment for arrays of destinations that include any vertical blending element.

	WIDE SCREEN SETTINGS
B
	Total Projectors	[ 2W x 2H ]
A			N
C
			A
K	Total H Res	1848
			V
	Total V Res	1336
	H Overlap	200
	V Overlap	200	A
			D
	Alignment Test Pattern	Off	J
	Background Format	[ Overlapped ]

FEATHER

SETUP

Figure 5-20.Sample Wide Screen Settings Menu (V Array)

The following functions are provided:

•Total Projectors — indicates the total number of Processors in the array, and provides the array’s dimensions (e.g., 2W x 2H, 1W x 2H). This field is for information only.

Encore Presentation System • User’s Guide • Rev 04 169