7. Operations

Using Backup and Restore

rëáåÖ=_~Åâìé=~åÇ=oÉëíçêÉ

The Encore system enables you to backup and restore all (or a portion) of the complete system configuration setup using a customer supplied flash memory card. The following topics are discussed:

System Backup

System Restore

póëíÉã=_~Åâìé

This procedure enables you to back up all (or a portion) of the entire Encore system configuration. Please note the following important points:

You can only store one system configuration on a Flash Memory Card.

Customer supplied Flash Memory Cards must be equal to or greater than 512MB.

„Use the following steps to back up your system:

1.Ensure that you have a (customer supplied) Flash Memory Card available.

2.Insert the Flash Memory Card into the Controller’s rear panel Memory Card slot.

3.Press MISC on the Home Menu, or press MISC in the System Keypad.

4.Press {BACKUP RESTORE} to display the Backup/Restore Menu.

5.On the Device line, select the combination of devices you want to back up:

~Ctrlr — backs up the Controller only.

~VP+SP — backs up the Video Processors and ScreenPRO-IIs only.

~Ctrlr+VP+SP — backs up the Controller, the Video Processors and any ScreenPRO-IIs.

6.On the Controller Options line, select which portion of the selected devices you want to back up. Choose between All, System or Presets.

7.Press {CHECK CARD} to display the Current Backup Menu.

~Check the “Controller files backed up” section to confirm the types of files present on the Flash Memory Card, if any. (e.g., System, Presets, ScreenPRO-II). If files are present, determine if you want to overwrite, or insert a new (blank) card.

~Press {BACK} to return to the Backup/Restore Menu.

8.Press {BACKUP} to backup your system to the Flash Memory Card using the selected device(s) and options.

Encore Presentation System • User’s Guide • Rev 04

 

353

 

Page 353
Image 353
Barco 26-0313000-00 manual RëáåÖ=~Åâìé=~åÇ=oÉëíçêÉ, PóëíÉã=~Åâìé, Encore Presentation System User’s Guide Rev 353