Encore Presentation System • User’s Guide • Rev 04 123
4. Controller Orientation
Controller Sections
mêÉëÉí=pÉÅíáçå
The figures below illustrate the Preset Sections on each Controller model.
Figure 4-9. Preset Section, Controller SC
Figure 4-10. Preset Section, Controller LC
A Preset is a register in which you can store and recall entire Controller setups. In basic
terms, one preset represents a single “look” of the Controller — including the current state
of all mixers, layers, sources and the DSK. Please note:
The Controller SC includes buttons for 64 Presets (8 pages of 8 presets each).
The Controller LC has buttons for 900 Presets (30 pages of 30 presets each).
Following are descriptions of each button’s function in the Preset Section.
Preset Buttons — press to recall a Preset to Preview. If “resources” are available, the
“look” stored with that preset will be recalled. If the button does not light, system resources
are not currently available to process the request.
When lit, the Red LED above a button indicates the currently selected page.
SIf LED 3 and button 30 are lit, the 30th Preset on page 3 is active.
In Chapter 5, refer to the “Preset Recall Options Menu” section on page208 for
information about the Preset Recall Options Menu. In Chapter 7, refer to the “A Word
About Resources” section on page 345 for additional information about resources.
Learn — hold down Learn, then press the desired Preset button to store the overall look of
the Controller into that register.
STo store the Controller setup in preset register 2, press Learn + 2.
Learn Delete Next Previous
3 4 57Page
8
PRESETS
1 2 6
Page
Learn Delete Next Previous
3 4 329 Page
30
PRESETS
1 2
Page
4
Important All Preset recall functions are affected by the settings on the
Preset Recall Options Menu. This menu (accessed by
pressing Presets on the System Keypad) enables you to
select all or a portion of the stored Preset for recall.
Learn