Barco 26-0313000-00 manual QÉëí=m~ííÉêå=jÉåì, Test Pattern

5. Menu Orientation

Output Menu

qÉëí=m~ííÉêå=jÉåì

From the Output Menu, press {TEST PATTERN} to display the Test Pattern Menu.

	TEST PATTERN
B	Output Monitor	All
A			N
C
			A
K	Mode	ON
			V
	Type	Burst
	Raster Box	On
	Alignment Test Pattern	Off	A
			D
			J
		WIDE
		SCREEN
Figure 5-16.Test Pattern Menu		(sample)

The Test Pattern Menu enables you to display test patterns for projector alignment.

•Output Monitor — selects the monitor(s) that are affected by the test pattern settings, either All, Program 1, Program 2 or Preview.

•Mode — enables you to turn test patterns on or off.

•Type — sets the test pattern. Choose between H Ramp, V Ramp, 100% Color Bars, 16x16 Grid, 32x32 Grid, Burst, 75% Color Bars, 50% Gray, Gray Steps 1, Gray Steps 2, White, Black, Red, Green, Blue and Gray Bars.

•Raster Box — when enabled, displays a raster box defined by the exact outer edges of the selected output resolution.

S If the output is 1024 x 768, the raster box encapsulates that format. Please note:

~The Burst test pattern is the only pattern that is smaller than the selected output resolution. When the Raster Box is enabled, the Burst pattern will appear within its boundaries.

~The Raster Box can be enabled when the test pattern is Off.

•Alignment Test Pattern — this field appears in wide screen mode only.

~Select Off to turn the alignment test pattern off.

~Select Hor to display a test pattern of horizontal lines.

~Select Ver to display a test pattern of vertical lines.

~Select Both to display a test pattern of both horizontal and vertical lines.

•Press {WIDE SCREEN} to display the Wide Screen Menu. Refer to the “Wide Screen Settings Menu” section on page 167 for details. This softkey label only appears when a widescreen destination is selected.

166 Encore Presentation System • User’s Guide • Rev 04