Turning Power On/Off
Caution
•Turn on the monitor first before turning on the PC or playback device.
Turning on the main power
Main power switch
TIPS
•If the monitor is in the input signal standby mode and you press the POWER button on the remote control unit, the monitor enters standby mode.
•You can turn on/off the monitor by pressing the power switch of the monitor.
•Setting the SCHEDULE flashes the power LED alternately in red and orange in standby mode.
Date/time setting
•If the time has yet to be set when the monitor is first turned on, the date/time setting screen appears. Set the date and time.
DATE/TIME SETTING |
|
|
|
|
|
|
|
|
| |
| / |
| / |
|
|
| : | : |
|
|
SET | 20 | 07 | / | 01 | / | 01 |
| 00 | : | 00 |
When the main power switch is off, the monitor cannot be turned on using the POWER button on the remote control unit.
Turning power on/off
Press the POWER button to turn the power ON/OFF.
| INPUT | |
| Power LED | |
Status of a power LED | Status of the monitor | |
Green lighting | Power “On” | |
Orange lighting | Power “Off” (Standby mode) | |
Green flashing | Input signal standby mode | |
(input using a PC) | ||
|
Caution
•When switching the main power switch or the POWER button off and back on, always wait for at least 5 seconds. A short interval may result in a malfunction.
CANCEL
OK…[MENU]
1.Press 
, 
, 
or 
to select the date and
time, and press 
or 
to change the numerical values.
2.Select SET and then press MENU .
•Be sure to set the date and time.
•The date/time setting screen will close automatically if no operation is performed for about 15 seconds. The date and time can be set using DATE/TIME SETTING from the OPTION menu when the date/time setting screen disappears.
TIPS
•The clock stops after the
depends on the status of the monitor.)
Disabling power on/off operations
Power on/power off operations can be disabled in order to protect the monitor from an accidental power off. Set the ADJUSTMENT LOCK in FUNCTION menu to “2”. (See page 24.)
E14
