Sharp PN-465E operation manual ADVANCED items AV input See

Menu Items

SCHEDULE

You can set the time to switch the monitor on and off.

Set this function with “SCHEDULE” in the OPTION menu. (See page 19.)

SCHEDULE		PC2 ANALOG
XXXX/XX/XX XXX XX:XX:XX
No. (1) POWER (2)	DAY OF THE WEEK (3)	TIME(4) INPUT (5)

OK…[MENU]

1 0 2 4 x 7 6 8 V: 60 Hz H: 48.4 kHz

1.Press or to select the SCHEDULE number, and press .

2.Set the SCHEDULE. (See the description below.)

Press or to select the date and time, and press

or to change the setting.

3.Press MENU .

SCHEDULE becomes effective.

(1)

●: SCHEDULE effective

-: SCHEDULE not effective

(2) POWER

ON : Switches the monitor on at the specified time.

OFF : Switches the monitor off at the specified time and puts the monitor in standby mode.

(3) DAY OF THE WEEK

Specifies the day of the week to execute the SCHEDULE. ONLY ONCE:

Executes the SCHEDULE once on the specified day. Specify the day of the week to execute the SCHEDULE.

EVERY WEEK:

Executes the SCHEDULE on the specified day of the week every week. Specify the day of the week to execute the

SCHEDULE.

Periodic setting such as “Monday through Friday” is also possible.

EVERY DAY:

Executes the SCHEDULE every day regardless of the day of the week.

(4) TIME

Specifies the time to execute the SCHEDULE.

(5) INPUT

Specifies the input mode at power-on. When not specifying, the screen at the previous power-off appears.

Input modes displayed on “PC1/AV1” depend on DVI SELECT settings.

Input modes displayed on “PC3/AV2” depend on BNC SELECT settings.

Caution

•Do not switch off the main power after setting the

SCHEDULE.

•Specify the correct date and time. (See pages 14 and 19.) SCHEDULE does not function unless the date and time are specified.

•Check regularly that the set date and time are correct.

TIPS

•Up to 8 SCHEDULE items can be registered.

•Setting the SCHEDULE flashes the power LED alternately in red and orange in standby mode.

•A SCHEDULE that has a large number has precedence over that of a small number when schedules overlap.

ADVANCED items (AV input) (See page 18.)

FLESH TONE

Adjust the hue control.

3D-NR

Reduce the noise of playback images on video.

Setting a higher level reduces more noise. However, it may cause blurring on an image.

MPEG-NR

Reduce block noise caused by digital compression.

3D-Y/C (AV3)

Specify whether to perform 3-dimension Y/C separation.

If dot interference or cross-colour is occurring in fast-motion scenes, selecting “OFF” may improve the image quality.

E22