Connecting the Power Cord

Caution

•Do not use a power cord other than the one supplied with the monitor.

1.Turn off the main power switch.

2.Plug the power cord (supplied)

3.Plug the power cord (supplied)

into the AC input terminal. into the AC power outlet.

Main power switch

3	For power
	For power
	outlet

AC input terminal Power cord (Supplied)

Mounting the Temporary Stands

Caution

•The monitor is heavy. It must be handled by 2 or more people.

•Please note that the temporary stands are for temporary use only until the monitor is properly mounted.

The temporary stand can be mounted at a position shown in the illustration.

Remove the screws from the monitor and mount the temporary stand using the screws.

Screws

Temporary stand

Caution

•After detaching the temporary stand, be sure to re-mount the removed screws on the monitor.

E12

Page 14

Image 14

Sharp PN-465E operation manual Connecting the Power Cord, Mounting the Temporary Stands

Contents

PN-465E Sharp Electronics Europe GmbH GREEN-AND-YELLOW Earth Blue Neutral Brown Live Refer Servicing to Qualified Service PersonnelFor Customers in U.K European Union Information on Disposal for Users private householdsInformation on Disposal for Business Users Other Countries outside the EU Dear Sharp Customer Safety Precautions Tips and Safety Instructions ﬂuorescent tubes in this product have a limited lifetime Contents Part Names Supplied AccessoriesLCD panel Remote control sensor See Front view Power button See Mute button See Remote control unitSignal transmitter Part Names Rear view For the monitor in horizontal orientation How to Install the MonitorMounting precautions For the monitor in vertical orientation Connection with a PC Connecting Peripheral EquipmentConnection with AV equipment AV1 input terminal AV2 input terminals Connecting Peripheral Equipment Connecting external speakersConnecting multiple monitors 11 E Mounting the Temporary Stands Connecting the Power CordInto the AC input terminal. into the AC power outlet Monitor is heavy. It must be handled by 2 or more people Remote control operation range Preparing the Remote Control UnitSetting the batteries Binding Cables Turning power on/off Turning Power On/OffTurning on the main power Disabling power on/off operations Mute Basic Operation15 E Menu DotbyDot Basic Operation Switching the screen sizeWide Zoom Normal Displaying the menu screen Menu Items17 E Example of operation Menu item details Menu Items 19 E Dual screen display Menu Items ENLARGE PC inputPIP/PbyP Horizontal orientation 21 EMenu Items Enlarge Vertical orientation ADVANCED items AV input See Screen display for adjustment Adjustments for PC screen displayAutomatic adjustment Automatic adjustment is complete in several seconds LED Adjustment LockOSD Display RS-232C 25 E Communication procedureControlling the Monitor with a PC PC connection ID numbers Controlling the Monitor with a PC Response code formatCommunication interval Controlling the Monitor with a PC Commands for ID control27 E Controlling the Monitor with a PC Repeater control Repeater control commandVolume settings for all monitors are returned How to read the command table RS-232C command tablePower control/Input mode selection 29 E Audio menu Setup menuControlling the Monitor with a PC Picture menu Controlling the Monitor with a PC Option menu Enlarge menu When the input mode is PC31 E PIP/PbyP menu Temperature Sensor Dsta Others Troubleshooting 33 E Vesa DDC2B SpeciﬁcationsProduct Speciﬁcations Vesa DPMS, DVI Dmpm 35 E Dimensional DrawingsCompatible signal timing PC Speciﬁcations RS-232C input terminal pins Speciﬁcations Power managementPC1/AV1 input terminal pins RS-232C output terminal pins