Encore Presentation System • User’s Guide • Rev 04 361
7. Operations
Working with Frame Grabs
bê~ëáåÖ=~åÇ=aÉäÉíáåÖ=cê~ãÉë
Please remember the following rules regarding erasing and deleting frames:
The "delete" procedure enables you to mark a selected frame as deleted — but
the ERASE function is still required for permanent deletion. You can consider this
as a “quick” delete function.
The "erase" procedure is a "destructive" process that enables you to permanently
erase a selected frame. This process takes from 1 to 2 minutes, and locks the
console during the procedure.
(Standard Systems — Delete) Use the following steps to delete a saved frame.
1. On the Frame Grab Menu, select the frame store that you wish to delete.
2. Press {DELETE} to display the Frame Delete Menu.
3. Press {YES} to delete the selected frame.
4. Repeat the procedure to delete additional frames.
("ES" Systems — Delete) Use the following steps to delete a saved frame.
1. On the Frame Grab Menu, press {DELETE} to display the Frame Delete Menu.
2. On the Saved Location line, select the frame that you wish to delete.
3. Press {DELETE} to delete the selected frame.
4. Repeat the procedure to delete additional frames.
(Standard Systems — Erase) Use the following steps to erase a saved frame.
1. On the Frame Grab Menu, select the frame store that you wish to erase.
2. Press {ERASE} to display the Frame Erase Menu.
3. Press {YES} to erase the selected frame. All front panel controls will be locked for
1 to 2 minutes.
4. Repeat the procedure to erase additional frames.
("ES" Systems — Delete) Use the following steps to erase a saved frame.
1. On the Frame Grab Menu, press {ERASE} to display the Frame Erase Menu.
2. On the Saved Location line, select the frame that you wish to erase.
3. Press {ERASE} to erase the selected frame.
4. Repeat the procedure to erase additional frames.
Note The ADJ knob only scrolls through saved frames.
Note The ADJ knob only scrolls through all frames, giving you
access to all 100 registers.