Barco 26-0313000-00 manual ~óÉê=`çåíêçä=pÉÅíáçå, Layer Control Section, Controller SC

4. Controller Orientation

Controller Sections

i~óÉê=`çåíêçä=pÉÅíáçå

The figures below illustrate the Layer Control Section on each Controller.

Background Mixer 1 Mixer 2 Mixer 3

Program

Layer	BG	BG	1	1	2	2	3	3	DSK
	A	B	A	B	A	B	A	B

Split

Split

Split

Figure 4-15.Layer Control Section, Controller SC

Background Mixer 1 Mixer 2 Mixer 3 Mixer 4 Mixer 5 Mixer 6

Program

Layer	BG	BG	1	1	2	2	3	3	4	4	5	5	6	6
	A	B	A	B	A	B	A	B	A	B	A	B	A	B

Split Split Split Split Split Split

DSK

Figure 4-16.Layer Control Section, Controller LC

The buttons in the Layer Control Section enable you to select (on Preview) the sources that will transition to or from Program — including backgrounds, layers and the DSK. When you select a blue “layer” button, you are electronically selecting a scaler that you want to assign as a PIP or Key, or modify in some manner. In this way, you control the overall look on Preview before you transition that look to Program.

Please note the following points:

•The Controller LC can control up to 12 layers on six mixers in a “stack” configuration.

•Using the Shift Layers button in the Layer Functions Section, the Controller SC can also control up to 12 layers on six mixers in a “stack” configuration. Refer to the “Layer Functions Section” heading on page 131 for details

•Two background sources and one DSK are provided.

•Each identical mixer is comprised of two layers (A and B) and a Split button.

•The buttons are arranged left-to-right in order of visual priority — backgrounds (lowest priority), mixers (in order of priority), and the DSK (highest priority).

•Any combination of backgrounds, layers and DSK can be selected on Preview for transition to or from Program, provided that resources are available. In Chapter 7, refer to the “A Word About Resources” section on page 345 for more details.

128 Encore Presentation System • User’s Guide • Rev 04