Barco 26-0313000-00 manual Aá~ÖåçëíáÅë=pÉíìé=jÉåì, Encore Presentation System User’s Guide Rev 177

5. Menu Orientation

System Menu

aá~ÖåçëíáÅë=pÉíìé=jÉåì

From the System Menu, press {DIAG} to display the Diagnostics Setup Menu.

		DIAGNOSTICS SETUP
B	Test LED Module			Top
A					N
C					A
K	Reset Rotary Encoders			Yes
					V
					A
					D
L					J
I
N
K
S
T
A
L
L
Y
	START	ROTARY	TBAR &	KEY
	LED TEST	ENCODER	JOYSTICK	DETECT
Figure 5-26.Diagnostics Setup Menu (sample)

The Diagnostics Setup Menu enables you to perform a variety of diagnostic tests on the Controller. The following functions are provided:

•Test LED Module — selects the region of the Controller that you wish to test.

~Controller SC: select All, Bottom or Top.

~Controller LC: select Left, Right, Middle or Top.

•Reset Rotary Encoders — (Yes/No) determines whether or not you wish to reset the rotary encoder values when you exit the Rotary Encoder Menu.

•Press {LINKS} to display the Widescreen Link Diagnostics Menu. Refer to the “Widescreen Link Diagnostics Menu” section on page 178 for details.

•Press {TALLY} to display the Tally Diagnostic Menu, and immediately start a test of all eight tally relays. This procedure takes several seconds to complete. Press {EXIT} when complete.

•Press {START LED TEST} to begin testing the selected LED module. This procedure takes several seconds to complete. Press {EXIT} when complete.

•Press {ROTARY ENCODER} to display the Rotary Encoder Menu. Refer to the “Rotary Encoder Menu” section on page 179 for details.

•Press {TBAR & JOYSTICK} to display the TBar & Joystick Menu. Refer to the “TBar & Joystick Menu” section on page 180 for details.

•Press {KEY DETECT} to display the Key Detect Menu. Refer to the “Key Detect Menu” section on page 181 for details.

Encore Presentation System • User’s Guide • Rev 04 177