5. Menu Orientation

Output Menu

dÉåäçÅâ=jÉåì

From the Output Menu, press {GLCK} to display the Genlock Menu.

B A C K

 

GENLOCK

 

 

Source

Black Burst

 

 

Type

[ V Lock ]

N A V

A

D

J

Figure 5-14.Genlock Menu (sample)

The Genlock Menu tells the VP which type of analog genlock signal is connected to the Processor’s Genlock connector.

Note

The menu is only available for VP destinations. The label does not appear for VPx destinations.

Source — sets the genlock source, either Black Burst, CSync or None.

Type — displays the type of genlock provided:

~When Source = None, Type = [Free-Run]

~When Source = Black Burst, Type = [V Lock]

~When Source = CSync, Type = [V Lock]

Please note:

PAL or NTSC black burst or composite sync signals are recommended.

In wide screen applications, all Processors must be locked together. If you provide genlock to the first Processor in your configuration, genlock is automatically distributed to the other Processors via Program Link connections.

If you do not use genlock in a wide screen application, Encore automatically makes the first Processor in your configuration the master.

In single screen applications, each Processor requires its own genlock signal.

Genlock is highly recommended in configurations that utilize camera sources.

164

 

Encore Presentation System • User’s Guide • Rev 04

 

Page 164
Image 164
Barco 26-0313000-00 manual DÉåäçÅâ=jÉåì, Genlock