Encore Presentation System • User’s Guide • Rev 04 165
5. Menu Orientation
Output Menu
pÉííáåÖë=jÉåì
From the Output Menu, press {SETTINGS} to display the Settings Menu.
Figure 5-15. Settings Menu (sample)
The Settings Menu sets sync parameters for your system’s monitors and projectors.
Output Monitor — selects the monitor(s) that are affected by the sync settings,
either All, Program 1, Program 2 or Preview.
Analog Sync Out — sets the desired analog output sync value. Choose between
+H+V, -H-V, +H-V, -H+V or CSync.
DVI Sync Out — sets the desired DVI output sync value. Choose between +H+V,
-H-V, +H-V, -H+V or CSync.
SOG / Y — selects a specific “sync on green” signal. Choose between Off,
Standard or Tri-Level (for certain HD devices).
Gamma — sets the output gamma to match that of your projector(s).
Raster Box Size — sets the size of the raster box that appears around PIPs and
Keys.
~Adjustment range (in pixels): 0 to 8
Flicker Filter — this option only appears when an interlaced output format is
selected (e.g., 1920x1080i @ 60).
~Adjustment range: OFF (no reduction) or 1 (minimum reduction)
through 20 (maximum reduction).
SOG / Y
Analog Sync Out
Off
B
A
C
K
N
A
V
A
D
J
SETTINGS
Output Monitor All
-H-V
Gamma 1.0
Raster Box Size 3
DVI Sync Out -H-V
Flicker Filter 1